Product Description:
BattleMountain Model VC and VCR heavy duty vertical-cantilever slurry pumps are designed for long life, efficient operation, and ease of maintenance resulting in a lower Total Cost of Ownership.
Download Literature:
Product Information
- Discharge Size Range: 1.5" - 10" (40mm - 250mm)
- Capacities: Up to 3,000 GPM (650 m3/hr)
- Total Dynamic Head: Up to 35' (9m)
- Sump Length to 7' (2,100mm)
- "Bearing and Shaft Assemblies: VC and VCR pumps are cantilever shaft designs operating below the first critical speeds. Bearings are grease lubricated with double-row taper thrust bearing located at the lower end of the bearing housing, and roller line bearing at the upper end of the bearing housing. Bearing end clearance adjustments are not required when assembling the bearing housing assembly. VC and VCR pumps of the same sizes are dimensionally-interchangeable."
- Advanced Impeller Design - Enclosed double suction impeller maximizes efficiency, pump out vanes are provided on front and back shrouds, hard metal or elastomer construction, cast-in impeller threads, and interchangeable hard meal and elastomer impellers.
- No shaft seals are required
- Bearing loads are minimized using double suction impeller design
- Impeller adjustment is made by shimming between the bearing housing and the mounting plate
- Metal and molded elastomer impellers are available, and are dimensionally interchangeable.
- Upper Strainer: Elastomer strainers fit in column openings.
- Lower Strainer: Molded elastomer for VCR and cast metal for VC
- Agitator kits available
- Washdown and wet pit applications
- Abrasive and/or corrosive
- High specific gravities
- Continuous duty pump applications
- Solid handling applications